Spraying Liquid Rubber isn’t difficult if you have the right tools. You will need an airless pump gun and a carefully chosen hose to do this job. You will have to do some calculations to figure out the right size and kind of pump for this pump. As in liquid form Liquid Rubber is a thick paint like product so you have to thin it by mixing it with a solvent.
Before you start spraying Liquid Rubber, you first have to clean the roof to remove dirt, debris and any loose material. The roof should be clean and dry otherwise Liquid Rubber will not properly adhere to the surface. Also, re-caulk the areas where caulk is missing.
When spraying start from the top of the roof and then making your way backwards. Use brush for detailing and hard to reach areas. Liquid Rubber will take some time to cure so choose a sunny and clear day for application. If the coating isn’t allowed to dry properly, it won’t cure as it should make it less effective.
To speak with a Technical Support Representative, Call: 855-281-0940 or visit,https://www.liquidrubberroofing.com/and to get yourself familiar with liquid rubber roofing visit,https://www.liquidrubberroofing.com/tips-for-using-a-liquid-rubber-spray-for-your-roof.html
No comments:
Post a Comment